The machine is equipped with a combination of rasp of the rotor rotates in two bearings, the spacing of rasp plate and Rasping Article are adjusted by bolts,sieve plate located under the Files. Separate bearing not in contact with the cabinet, and therefore will not be damaged by water leakage in case Rasper. Rasper rotor by the motor and V-belt pulley drive motor and the rotor is mounted in a ver...
The rasper machine is equipped with a combination of rasp of the rotor rotates in two bearings, the spacing of rasp plate and rasping article are adjusted by bolts, sieve plate located under the files. Separate bearing not in contact with the cabinet, and therefore will not be damaged by water leakage in case rasper. Rasper rotor by the motor and V-belt pulley drive motor and the rotor is mounted ...
1. Installation By drawing on-site precast concrete foundation, according to the size of the reserve a fixed bolt hole (see "Rasper foot drawings"), concrete foundation must be smooth, level. When Rasper installed in its final position, make sure the holes for the fixing bolts located in the center, and check whether the machine perfectly level (important !!). According to the provisions of second...
Working condition 1.temperature:0~40℃; 2.humidity≤70%; 3.Operating Voltage:380V,frequency:50Hz(different design for different contries). Installation, operation and maintenance 1. Installation According to process requirements that install chopper in the exact location. It shall be placed in a horizontal position. Fix the disc distributor feeder and silo after adjust the horizontal position. 2. Op...